CPA exam testlet 3 cover with one adult learner reviewing exhibits and responses

CPA Exam Testlet 3: Exhibits, Evidence and Responses

Posted by:

|

On:

|

CPA exam testlet 3 is the first task-based simulation group in the current section sequence. It follows two MCQ testlets, so the work shifts from selecting a single answer to completing the responses a simulation requests. Start with those instructions, identify the supporting exhibits and connect each required response to the right evidence. A correct calculation can still produce an unsupported answer if it uses the wrong document.

Checked October 25, 2026: This FAQ uses current AICPA format and software guidance. The Juniper Works packet below is an original, simplified teaching example. Its document-selection rule is supplied expressly for the exercise; it is not a universal accounting rule or official examination content.

What Starts CPA Exam Testlet 3?

The first group of task-based simulations starts here, after both MCQ groups. The current AICPA Blueprint page describes five testlets: two containing MCQs followed by three containing TBSs. Therefore, testlet three is a group of tasks, rather than another multiple-choice set.

A simulation can require calculations, selections or other responses to a scenario. Read its particular requirement before deciding what to extract. Merely recognizing the topic does not tell you which amount, conclusion or response format the task needs.

Also distinguish one simulation from its surrounding testlet. Finishing the first simulation does not necessarily complete the whole group. Use the current overview and section design to understand what remains before confirming submission.

How Many Simulations Are in CPA Exam Testlet 3?

The number depends on the section. The cited 2026 Blueprint assigns two TBSs to testlet three in AUD, FAR, REG, BAR and TCP. ISC has one TBS in that position. Check the applicable section and edition before setting up a format rehearsal.

Those counts do not specify the number of response fields or exhibits within each simulation. Likewise, two simulations do not establish two identical workloads or equal time allowances. The actual instructions determine the work each task requires.

For example, a short exhibit-selection exercise can help you practise one part of simulation work. It does not reproduce an entire FAR or ISC testlet. Label that narrower scope so that a successful small exercise does not become a claim of complete simulation readiness.

Which Exhibit Should You Open First?

Use the task requirement to identify the evidence you need, rather than treating one exhibit order as correct for every simulation. The AICPA exhibit help explains opening documents through their links and arranging or resizing their windows. Those controls support reading; they do not decide which evidence answers a requirement.

First, identify what the response must establish. Then inspect the exhibit titles and any instructions about period, version, approval or scope. If a title is truncated, the published help describes hovering to see its full name. A partly visible name should not become a guessed source identity.

Next, read the relevant contents rather than relying on the title alone. Scroll or resize when necessary to see the complete document. The important relationship is between the requested response and the evidence that supports it, not the number of windows you have opened.

How Does the Original Practice Packet Work?

It asks you to select the specifically required source before calculating. In this original Juniper Works exercise, the instruction is: use approved Schedule A for the March 31 balances. Report gross receivables and a simplified net amount equal to gross receivables minus the supplied allowance. Assume no other adjustments.

Original practice exhibit Status and date Gross receivables Supplied allowance
Schedule A Approved, April 4 $34,200 $2,100
Schedule B Draft, April 5 $35,400 $2,200

The instruction identifies A, so use $34,200 as gross receivables. Next, subtract its $2,100 allowance: $34,200 − $2,100 = $32,100. The required responses are therefore gross receivables of $34,200 and the exercise’s net amount of $32,100.

Schedule B has a later date, but that fact does not replace the stated source requirement. Its draft status is also visible. The example does not teach “always use the oldest document” or “always ignore drafts.” It teaches following the controlling instruction supplied for this particular packet.

Keep the source name beside the calculation in your practice working. This makes both parts inspectable: why you chose the inputs and how you used them. The simple subtraction is only one part of the task.

Original approved Schedule A showing gross receivables of 34200 minus supplied allowance of 2100 equals net response of 32100

Does Correct Arithmetic Prove You Used the Right Exhibit?

No: arithmetic can be correct for inputs that the task does not authorize. Using Schedule B would give $35,400 − $2,200 = $33,200. That subtraction is mathematically correct, but it does not answer the original instruction to use Schedule A.

Therefore, a calculator check alone would not catch this source-selection error. Compare the selected document with the requirement before checking the numerical operation. Otherwise, repeating the same valid subtraction could reinforce an answer based on the wrong inputs.

Also avoid mixing the two schedules. Subtracting B’s $2,200 allowance from A’s $34,200 gross balance would produce $32,000. That amount belongs to neither complete supplied schedule. The problem is the unsupported combination, rather than a failure to subtract.

During review, trace each input to its source row. This helps distinguish selecting the wrong complete exhibit from combining incompatible inputs. Those errors need different corrections, even if both lead to a wrong final amount.

A reverse check has the same limit. For A, adding $32,100 net and $2,100 allowance returns $34,200 gross. However, B’s $33,200 plus $2,200 also returns its own $35,400 gross. Both sets tie internally. That consistency check tests the relationship between numbers; it does not establish that you selected the required schedule. Therefore, keep the source check and the arithmetic check as two distinct parts of your review.

Can a Response Field Be Populated but Still Be Wrong?

Yes: a populated field establishes that a response is present, not that its evidence, unit or calculation is correct. The AICPA numeric-entry instructions describe accepting an entered value into a cell. Acceptance records the response; it does not validate the reasoning behind it.

In the original packet, entering $34,200 in both requested fields would fill them both. However, the second field asks for the simplified net amount, so it requires $32,100. The gross value is a valid supplied input but the wrong response to that second request.

Similarly, typing $32,100 into the gross field would put a supported calculation in the wrong place. Check the field label alongside the value. During practice, preserve enough working to distinguish a source error from a calculation error or a placement error.

What Changes When the Supplied Evidence Is Replaced?

Recalculate the outputs affected by the changed evidence, while leaving unaffected facts alone. For this new practice variation, explicitly replace the original instruction with a direction to use a newly approved Schedule C. It keeps gross receivables at $34,200 but changes the supplied allowance to $2,400.

Under the same simplified subtraction rule, the new net amount is $34,200 − $2,400 = $31,800. Gross receivables remain $34,200. The $300 increase in allowance reduces the net amount by $300; it does not reduce the gross balance in this defined exercise.

The original response of $32,100 therefore cannot simply carry forward. First recognize that the authorized source and one input changed. Then update the dependent response. This is a separate teaching variation, not a claim that live examination documents change while you are answering them.

When Does the Standardized Break Occur?

The standard optional 15-minute clock-stopping break follows completion of testlet three. The AICPA format FAQ places it after this first TBS group. It does not occur automatically when you finish the MCQs or merely finish one simulation within an unfinished group.

Before final submission, review the open group’s required responses and available instructions. Once you confirm submission, you cannot return to that testlet. A planned break afterward does not preserve a right to revisit its fields.

Also follow your actual testing instructions and applicable approved accommodations. The standard break description does not establish every candidate’s timing entitlement. During practice, distinguish the act of completing the group from the later break opportunity instead of treating them as one step.

How Should You Review CPA Exam Testlet 3 Practice?

Review the earliest unsupported connection between instruction, source, calculation and field. In the original packet, choosing B despite the direction to use A is a source-selection problem. Using A correctly but entering its gross amount in the net field is a different problem.

For CPA exam testlet 3 practice, name that distinction before choosing another exercise. Repeating subtraction will not necessarily fix selecting the wrong exhibit. Conversely, finding the correct schedule does not remove the need to calculate and place each requested response.

Use the official sample test for software familiarity, and the simulation study guide for a broader practice route. Neither this short example nor one correct attempt establishes complete section readiness.

Finally, keep the attempted working separate from the explanation you read afterward. Record which source you actually chose, the amount you derived and the field you completed. A precise observation makes the next review useful without inventing an official score or a universal simulation strategy.

Sources