These free CPA practice questions show how capacity can change a special-order calculation. Work through three original items using one small production case. You will calculate an incremental profit, account for displaced sales, and find a maximum total setup cost. Commit to each answer before opening its explanation.
The company, quantities and costs below are invented for this exercise. These are independently authored learning questions, not official, recalled or reconstructed CPA Exam items. The stated assumptions control each calculation. Treat the result as evidence about your reasoning, rather than a recommendation for an actual business or a prediction of exam readiness.

Use These Free CPA Practice Questions to Test Capacity
A low special-order price does not settle the decision by itself. First, identify what accepting the order would change. For example, the order may create production costs, require a setup payment or displace another sale. However, a cost allocation that remains identical under both choices answers a different question from an incremental outlay.
For this set, compare accepting the entire order with rejecting it. Write the order’s incremental revenue, incremental production cost, setup cost and any lost regular contribution separately. Then calculate the net difference. As a result, keeping these lines separate makes a wrong assumption easier to locate than one unexplained total.
Allow roughly eight to twelve minutes for the first attempt, followed by untimed review. This is an editorial study suggestion, not an official pacing standard. Use a calculator if helpful, but show the quantity and per-unit amounts before multiplying. Also label every answer as an increase, decrease or threshold.
Read the Original Northline Order Packet
Imagine Northline considering a one-time order for 200 identical units at $38 each. Its incremental variable production cost is $24 per unit. A single $900 setup payment occurs only if Northline accepts the order. The customer buys all 200 units or none; partial acceptance is unavailable.
All amounts are U.S. dollars, and special-order and regular units use the same production time. The displacement relationship is one for one.
| Input | Amount | Meaning in this exercise |
|---|---|---|
| Order quantity | 200 units | All or none |
| Order price | $38 per unit | Revenue from this order |
| Variable production cost | $24 per unit | Incremental cost of its units |
| Setup payment | $900 total | Only if the order is accepted |
| Existing fixed-cost allocation | $1,200 total | Unchanged under either choice |
In the baseline, Northline has enough unused capacity for all 200 units. Accepting the order loses no regular sales. However, the existing fixed costs still occur if Northline rejects the order; accepting it neither adds to nor avoids them. Therefore, the allocation is not an additional cash outlay in this comparison.
Assume no taxes, financing effects, overtime, additional delivery cost, inventory change or other incremental expenditure. Ignore unquantified strategic and customer effects for the arithmetic. However, the later questions state their capacity changes explicitly. Each question starts from its own assumptions, so do not carry a previous capacity condition forward silently.
Free CPA Practice Questions, Item 1: Use the Spare Capacity
Tested skill: separate an order’s incremental costs from an unchanged allocation. Assumptions: use the baseline packet, including sufficient unused capacity and no displaced regular sales. Difficulty: foundational application.
Original practice question: By how much would accepting the order change Northline’s profit under these assumptions?
- A. $700 increase
- B. $1,900 increase
- C. $2,800 increase
- D. $7,600 increase
Before revealing the answer, identify which costs differ between accepting and rejecting. Then show whether your result includes the one-time setup payment. State why the fixed-cost allocation does or does not enter this particular comparison.
Item 1: Check the incremental difference
Choose Item 1 before revealing.
Reveal the answer
Answer: B. $1,900 increase = 200 × ($38 − $24) − $900. However, A subtracts the unchanged $1,200 allocation; C omits setup; D reports revenue without costs. No regular contribution is lost in this case.
Next review: compare accept and reject columns, then cancel identical existing fixed costs.
Free CPA Practice Questions, Item 2: Account for Lost Sales
Tested skill: include the contribution sacrificed when capacity is unavailable. Assumptions: use the same order price, variable cost and $900 setup. Capacity is now fully used. Every special-order unit displaces one regular unit that would contribute $12 after its own avoidable costs. All 200 displaced sales are permanently lost. No other fact changes. Difficulty: intermediate application.
Original practice question: What is the incremental profit effect of accepting the entire special order in this full-capacity case?
- A. $1,900 increase
- B. $400 increase
- C. $1,700 decrease
- D. $500 decrease
Record the number of regular units displaced and the contribution lost per unit. In particular, distinguish lost contribution from lost revenue. Therefore, the supplied $12 already accounts for the regular product’s own avoidable costs, so subtracting those costs again would change the meaning of that input.
Item 2: Check the displaced contribution
Choose Item 2 before revealing.
Reveal the answer
Answer: D. $500 decrease = $1,900 − (200 × $12). However, A ignores lost contribution; B omits setup; C subtracts the unchanged fixed allocation again. In particular, the $12 is already contribution after the regular units' avoidable costs.
Next review: label lost units and contribution per unit, and count setup and sacrifice once each.
Free CPA Practice Questions, Item 3: Find the Setup Limit
Tested skill: solve for a maximum total incremental cost under partial capacity. Assumptions: reset the case. Only 80 of the 200 units fit unused capacity. Each of the remaining 120 units displaces one regular unit with the same $12 contribution. Replace the original $900 setup payment with an unknown total setup cost. Keep all other order facts unchanged. Difficulty: intermediate reverse calculation.
Original practice question: What is the maximum total setup cost that leaves the incremental profit effect at zero or above?
- A. $1,360
- B. $460
- C. $2,800
- D. $400
Write the number of displaced units before calculating the threshold. Next, underline “total setup cost.” Instead, the question replaces the original setup amount; it does not ask how much more Northline could spend after paying that amount.
Item 3: Check the total setup ceiling
Choose Item 3 before revealing.
Reveal the answer
Answer: A. $1,360 total = $2,800 − (120 × $12). Instead, B gives extra headroom after $900; C ignores displaced contribution; D assumes all 200 units displace sales. Therefore, the old setup amount is replaced, not added.
Next review: substitute the proposed total setup into incremental profit; it should equal zero at the ceiling.
Compare the Capacity Cases After Attempting All Three
Now inspect how the capacity assumption changes the same order’s economics. The order produces $2,800 before setup and displaced-sale effects. Subtracting the $900 setup leaves $1,900 in the unused-capacity case. In contrast, losing $2,400 of regular contribution turns that result into a $500 decrease at full capacity.
The fixed-cost allocation stays outside both differences because the packet makes it unchanged. However, that does not mean all fixed costs are always irrelevant. A new fixed payment caused by accepting an order belongs in the comparison. Here, the setup payment illustrates that distinction even though it is a single total rather than a per-unit charge.

For Item 3, only 120 units displace regular output. Their lost contribution totals $1,440, leaving $1,360 available for the entire setup payment. At that threshold, the incremental profit effect is zero. Consequently, a larger setup amount makes it negative; a smaller one leaves a positive difference, given the other stated facts.
Explain the Difference Between a Limit and Extra Headroom
In contrast, the $460 distractor in Item 3 answers a different question. It subtracts the original $900 payment from the $1,360 total limit. That would measure additional headroom if a $900 setup were already part of the scenario. Instead, the actual question replaces that input and asks for the full allowable total.
For example, a proposed total setup payment of $1,500 would exceed the limit by $140. However, a proposed total of $1,200 would leave $160 of incremental profit in the partial-capacity case. Therefore, these comparisons use the same $1,360 threshold; neither requires adding the old setup amount back into the calculation.
Also keep the zero-profit boundary separate from a final business decision. Zero means the quantified alternatives tie under the supplied assumptions. It does not prove that a real customer relationship, delivery promise or production schedule makes the order attractive. Those considerations require facts that this teaching packet deliberately does not provide.
Choose a Retry From the First Wrong Line
If Item 1 attracted the fixed allocation, write an accept column and a reject column. Place the same existing fixed cost in both. Then cancel identical amounts before comparing the remaining differences. This shows why an allocation can matter for a full-cost report while making no difference to the stated short-term choice.
If Item 2 went wrong, label the lost unit count and lost contribution separately. Then check whether you included the setup once and the sacrifice once. A positive order contribution does not by itself prove a positive incremental profit when the order uses capacity that has another stated use.
If Item 3 went wrong, retry with 100 unused units and 100 displaced units. Keep the order quantity, price and variable cost fixed, and solve for a new maximum total setup payment. Finally, check your result by substituting that payment back into the incremental-profit calculation. The difference should be zero at the boundary.
Use the Sources and the Next Practice Set for Their Own Jobs
OpenStax’s relevant-information chapter explains why a comparison focuses on costs and revenues that differ between alternatives. Its special-order chapter also discusses capacity and qualitative considerations. Northline’s facts, answer choices and threshold exercise are independently authored here; they do not reproduce the textbook’s example or figures.
For broader topic variety, use our seven-drill online practice sampler. This page develops the capacity question in more depth through full and partial displacement. The current AICPA Blueprint resource, checked October 26, 2026, controls your wider exam-content planning. These three questions do not establish complete section coverage or an exact task-statement mapping.
Finally, NASBA’s score explanation distinguishes a reported CPA score from a percentage correct. Keep this small practice result as a record of reasoning. Leave these free CPA practice questions with one corrected cost line, one explicit capacity assumption and one fresh threshold check.
